Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers - Manual (Page 47)

Maintaining the printer
4-3
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
4 Lift the continuous cleaning roller unit out of the printer (step 1 in Figure 4-2).
Figure 4-2: Lift the roller out of the printer
5 Slide the used sleeve off the cleaning roller spindle (step 2 in Figure 4-2). Discard
the used sleeve.
6 Slide a new replaceable cleaning sleeve onto the spindle (step 1 in Figure 4-3).
Figure 4-3: Replace the cleaning roller sleeve
7 Hold the replaceable cleaning roller spindle by the ends and remove the
protective cover from the sleeve (step 2 in Figure 4-3). Discard the protective
cover.
Avoid touching the sticky surface of the replaceable sleeve. Oils from your
fingers could reduce cleaning and could affect card quality.
8 Continue to hold the spindle by the ends. Replace the spindle with sleeve in the
printer (step 3 in Figure 4-3).
2
1
1
3
3
2
i