Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers - Manual (Page 14)

1-8
Overview
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Back of the printer
Figure 1-5 shows the back of the Select Class printer:
Figure 1-5: The back of the Select printer
If the printer includes an optional simplex smart card module or duplex module, that
module extends farther than the ports and receptacles.
Find the following on the back of the printer:
Data Port
The printer includes two data ports. Select only one data port to use.
•
ECP parallel port
Use the ECP parallel port to connect the printer's data cable to the PC, if the
printer was ordered with a parallel cable.
•
USB port
Use the USB port to connect the printer's data cable to the PC, if the printer was
ordered with a USB cable.
Power switch
Use the Power switch to power on or power off the printer.
Power receptacle
This is the receptacle for connecting the power cable.
Power receptacle
ECP parallel port
Contact smart card port
Contactless smart card port
USB port
Power switch
Data port