Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers - Manual (Page 29)

Using the printer
2-13
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Shutting down the system
The printer and PC can be left on during lunch time and other short breaks. Follow
your security procedures when leaving the printer.
Shut down the printer and system
1 Make sure all cards have completed processing before turning off the power. (You
can suspend the Status Monitor to stop communication between the printer and
driver. See “Using the Status Monitor” on page 3-9.)
2 Press the Power button to turn off power to the printer.
Figure 2-14: Press the power button to power off the printer
3 Follow your policy to secure unprinted card stock, supplies, and printed cards. For
example:
– Remove the card cartridge.
– Remove the print ribbon cartridge. Carry cartridges to a secure location, such
as a safe, a locking drawer, or a locking closet.
4 Close PC applications and power off other equipment (including the PC) following
the procedure established.
If you will store the printer for several months, remove supplies before storing
(including cards, print ribbon, and replaceable cleaning sleeve).
♦
i