Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 42)

Chapter 1 - System Description
BreezeACCESS VL System Manual
10
Table 1-5: SU-A/E Subscriber Unit Types
SU Type Description
SU-54-BD (SU-54) A high-rate CPE that supports a full LAN. Not available in
the 900 MHz band.
SU-6-BD (SU-6) A medium rate CPE that supports a full LAN*. Not available
in the 900 MHz band.
SU-3-BD (SU-3) An entry level CPE that supports a full LAN**
SU-8-BD (SU-8) A medium rate CPE that supports a full LAN. Available only
in the 900 MHz band. The SU-8 functionality is available by
loading the relevant feature license to an SU-3 unit.
* In the past, SU-6-1D units were also available. After being upgraded to version
5.0, SU-6-1D units will automatically be changed to SU-6-BD units.
** In the past, only SU-3-1D and SU-3-4D were available. After being upgraded to
version 5.0, SU-3-1D/4D units will automatically be changed to SU-3-BD units.
(In SNMP, these units will be reported as SU-3-4D. However, all SU-3 units
running SW version 5.0 or higher will behave as SU-3-BD units, supporting a full
LAN).
The IDU provides the interface to the user’s equipment and is powered from the
110/220 VAC mains. The customer's data equipment is connected via a standard
IEEE 802.3 Ethernet 10/100BaseT (RJ 45) interface. The indoor unit is
connected to the outdoor unit via a Category 5 Ethernet cable. This cable carries
Ethernet traffic between the indoor and the outdoor units, and also transfers
power (54 VDC) and control from the indoor unit to the outdoor unit.