Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 193)

Menus and Parameters
Operation and Administration
161
After reset, the Interference Mitigation statistics file will be updated, and
depending on the Scanning Type you defined, the unit may be configured to a
new operating channel and/or noise floor.
4.2.6.2.19.4 Delete Statistics File
Deletes the Interference Mitigation statistics file created during the previous scan.
A final validation is required prior to deletion:
„ 0 – Cancel Operation
„ 1 – Delete File
4.2.6.2.19.5 Show Interference Mitigation Parameters & Data
This feature displays a review of the Interference Mitigation settings and the
statistics generated during the latest scan (if the statistics file was not deleted in
the meanwhile). These statistics include for each defined channel the following
parameters:
„ Frequency
„ Noise Floor
„ Achievable Distance
„ Maximum Throughput