Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 154)

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
122
‘ The value configured for the Maximum Modulation Level parameter of the
Subscriber Unit
‘ The Status of the Subscriber Unit. There are three options:
1
Associated
2
Authenticated
3
Not Authenticated (a temporary status)
The various status states are described below (this is a simplified
description of the association process without the effects of the Best AU
algorithm).
Table 4-4: Authentication and Association Process
Message Direction Status in AU
SU Status: Scanning
A Beacon with correct ESSID AU
→ SU -
SU Status: Synchronized
Authentication Request SU
→ AU Not
authenticated
Authentication Successful AU
→ SU Authenticated
SU Status: Authenticated
Association Request SU
→ AU Authenticated
Association Successful AU
→ SU Associated
SU Status: Associated
ACK SU
→ AU Associated
Data Traffic SU
↔ AU Associated
‘ The SNR of the SU measured at the AU
‘ The RSSI of the SU measured at the AU
‘ The Unit Name of the SU.
‘ The SW version of the SU.
‘ The Unit Type of the SU.