Alvarion BREEZEACCESS SW VERSION 5.1 User Manual
Page 196
Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
164
4.2.6.3.3 Set Network Management IP Address
The Set Network Management IP Address option enables defining up to 10 IP
addresses of devices that can manage the unit if the Network Management
Filtering option is enabled.
The default Network Management IP Address is 0.0.0.0 (all 10 addresses).
4.2.6.3.4 Delete a Network Management IP Address
The Delete Network Management IP Address option enables deleting IP address
entries from the Network Management IP Addresses list.
4.2.6.3.5 Delete All Network Management IP Addresses
The Delete All Network Management IP Addresses option enables deleting all
entries from the Network Management IP Addresses list.
4.2.6.3.6 Set/Change Network Management IP Address Ranges
The Set/Change Network Management IP address Ranges menu enables defining,
updating or deleting IP address ranges from which the unit can be managed if the
Network Management Filtering option is enabled. This is in addition to the
previous options in the Network Management menu that enable defining,
updating and deleting discrete IP addresses.
The menu includes the following options:
4.2.6.3.6.1 Set/Change
Network
Management IP Address Ranges
The Set/Change Network Management IP Address Ranges option enables
defining/updating up to 10 IP address ranges from which the unit can be
managed if the Network Management Filtering option is enabled.
The default Network Management IP Address Range is 0.0.0.0 TO 0.0.0.0 (all 10
ranges).
A range can be defined using a string that includes either a start and end
address, in the format “
to 192.168.1.255), or a base address and a mask, in the format “
mask
4.2.6.3.6.2 Delete
Network
Management IP Address Range
The Delete Network Management IP Address Range option enables deleting IP
address range entries from the Network Management IP Address Ranges list.
4.2.6.3.6.3 Delete All Network Management IP Address Ranges
The Delete All Network Management IP Address Ranges option enables deleting
all entries from the Network Management IP Address Ranges list.