Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 258)

Appendix E - Parameters Summary
BreezeACCESS VL System Manual
226
E.1 Parameters Summary
E.1.1 Unit Control Parameters
Parameter Unit Range Default Run-Time
Change Unit Name AU, SU Up to 32 printable ASCII characters None Yes
Change Read Only
Password AU, SU Up to 8 printable ASCII characters public No
Change Installer
Password AU, SU Up to 8 printable ASCII characters user No
Change Administrator
Password AU, SU Up to 8 printable ASCII characters private No
FTP SW Version File
Name AU, SU Up to 20 printable ASCII characters.
An empty string is not allowed. VxWorks.bz Yes
Configuration File Name AU, SU Up to 20 printable ASCII characters.
An empty string is not allowed. config.cfg Yes
Operator Defaults File
Name AU, SU Up to 20 printable ASCII characters.
An empty string is not allowed. operator.cmr Yes
FTP Source Dir AU, SU Up to 80 printable ASCII characters.
Use “.” to clear. None (empty) Yes
FTP Server IP Address AU, SU IP address 10.0.0.253 Yes
FTP Gateway IP Address AU, SU IP address 0.0.0.0 Yes
FTP User Name AU, SU Up to 18 printable ASCII characters vx Yes
FTP Password AU, SU Up to 18 printable ASCII characters vx Yes
FTP Log File Name AU, SU Up to 20 printable ASCII characters logfile.log Yes
FTP Log File Destination
Directory AU, SU Up to 80 printable ASCII characters.
Use “.” to clear. None (empty) Yes
Event Log Policy AU, SU „ Message
„ Warning
„ Error
„ Fatal
„ Log
None
Warning Yes
Log Out Timer AU, SU 1-999 minutes 5 Yes
Ethernet Port Negotiation
Mode AU, SU „ Force 10 Mbps and Half-Duplex
„ Force 10 Mbps and Full-Duplex
„ Force 100 Mbps and Half-Duplex
„ Force 100 Mbps and Full-Duplex
„ Auto
Negotiation
Auto Negotiation No
Change System Location AU, SU Up to 34 printable ASCII characters None Yes
Manual Feature Upgrade AU, SU License string: 32 to 64 hexadecimal
digits None No