Program.. card.. setup.. start – IDEC FL1E SmartRelay User Manual
Page 269

IDEC SmartRelay memory and battery cartridge (card)
IDEC SmartRelay Manual
255
When IDEC SmartRelay has finished copying, it
automatically returns you to the main menu:
>Program..
Card..
Setup..
Start
The circuit program backup is now stored on your memory
cartridge or combined memory/battery cartridge and you can
remove the cartridge. Do not forget to replace the cap.
If power fails while IDEC SmartRelay is copying the circuit
program, repeat the process after Power On.
Note
The password of a protected circuit program in IDEC SmartRelay
also applies to the copied program version on your memory car-
tridge or combined memory/battery cartridge.