Anritsu Series MS278XB - Manual (Page 239)

Measurements Operation Verification
MS278XB OM 5-83
26. Compute the Calculated Phase Noise for each value in Table 5-8.
27. Return Optimize Phase Noise to the Auto setting.
Table 5-8. Single Sideband Phase Noise Test
Measured Carrier Power:
Center
Frequency
Offset
Measured
Measured Carrier to
Noise Ratio C/N (dBc)
Calculated Phase Noise
(dBc/Hz)
Specification
(dBc/Hz)
1.001 GHz 1 MHz C/N–40 dB=
<
–139
1.005 GHz 5 MHz C/N–40 dB=
<
–142
1.010 GHz 10 MHz C/N–40 dB=
<
–142