Anritsu Series MS278XB - Manual (Page 160)

Basic Measurement Setups Measurements
5-4 MS278XB OM
Setting the Start and Stop Frequencies
The start frequency is set at the left side of the graticule display and the stop frequency is set at the right side
of the graticule display.
1. Press the Freq icon on the main menu bar, or press the Frequency key on the instrument front panel, to
display the Frequency menu below:
2. Press in the Start parameter field and use the keypad to enter the desired start frequency, then select the
appropriate frequency terminator from the fly-out menu.
3. Repeat the previous step for the Stop frequency.
Note: When the Start and Stop frequencies are entered, the Center frequency and frequency Span are
automatically determined.