Multicarrier channel power setup dialog, Multicarrier channel power setup dialog -40 – Anritsu Series MS278XB User Manual
Page 138

Parameter Entry and Measurement Setup Dialog Archive
Front Panel Menus
4-40
MS278XB OM
Multicarrier Channel Power Setup Dialog
Multicarrier Channel Power is similar to the ACP measurement and can be set up as follows:
Transmit Channels Tab
Number of Channels: Sets the number of
channels.
Range: Integers from +1 to +12 channels
(Do not enter negative numbers)
Default: 12 channels
Channel Width: Sets the channel width for each
of the channels.
Range: 1 Hz to 8 GHz
Default: 5 MHz
Channel Spacing: Sets the channel spacing for
each of the channels.
Range: +1 Hz
≤
Channel Spacing
≤
8 GHz
Default: 10 MHz
Scroll Buttons: Scrolls up or down the channel
list.
Figure 4-16. Multicarrier Channel Power Setup Dialog