Setting fault detection policy, Setting fault detection policy -24, Ip configuration – IronPort Systems 4108GL User Manual
Page 80: Using the hp web browser interface overview, Overview, Make configuration changes to the switch, This chapter covers the following, Description of the web browser interface, N o t e
4-24
Using the HP Web Browser Interface
Status Reporting Features
U
si
n
g t
h
e HP Web
Br
owser
In
te
rf
a
c
e
■
Product Name.
The product name of the switch to which you are
connected in the current web browser interface session.
Setting Fault Detection Policy
One of the powerful features in the web browser interface is the Fault
Detection facility. For your switch, this feature controls the types of alerts
reported to the Alert Log based on their level of severity.
Set this policy in the Fault Detection window (figure 4-16).
Figure 4-16. The Fault Detection Window
The Fault Detection screen contains a list box for setting fault detection and
response policy. You set the sensitivity level at which a network problem
should generate an alert and send it to the Alert Log.
To provide the most information on network problems in the Alert Log, the
recommended sensitivity level for
Log Network Problems is High Sensitivity. The
Fault Detection settings are: