IronPort Systems 4108GL - Manual (Page 273)

13-15
HP Procurve Stack Management
HP Procurve Stack Management
H
P
Pr
oc
u
rv
e
S
tac
k
Ma
na
g
e
me
n
t
Figure 13-6. The Default Stack Configuration Screen
4. Move the cursor to the Stack State field by pressing [E] (for Edit ). Then
use the Space bar to select the Commander option.
5. Press the downarrow key to display the Commander configuration fields
in the Stack Configuration screen.
Figure 13-7. The Default Commander Configuration in the Stack Configuration
Screen
6. Enter a unique stack name (up to 15 characters; no spaces) and press the
downarrow key.
7. Ensure that the Commander has the desired Auto Grab setting, then press
the downarrow key:
• No (the default) prevents automatic joining of Candidates that
have their
Auto Join set to Yes .
• Yes enables the Commander to automatically take a Candidate
into the stack as a Member if the Candidate has
Auto Join set to Yes
( the default Candidate setting) and does not have a previously
configured password.
8. Accept or change the transmission interval (default: 60 seconds), then
press
[Enter] to return the cursor to the Actions line.
9. Press [S] (for Save ) to save your configuration changes and return to the
Stacking menu.
Your Commander switch should now be ready to automatically or manually
acquire Member switches from the list of discovered Candidates, depending
on your configuration choices.