Web: viewing and configuring stacking, Web: viewing and configuring stacking -47 – IronPort Systems 4108GL User Manual
Page 305

13-47
HP Procurve Stack Management
HP Procurve Stack Management
H
P
Pr
oc
u
rv
e
S
tac
k
Ma
na
g
e
me
n
t
■
Stacking uses only the primary VLAN on each switch in a stack.
■
The primary VLAN can be tagged or untagged as needed in the
stacking path from switch to switch.
■
The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.
Web: Viewing and Configuring Stacking
Figure 13-38. Example of the Web Browser Interface for a Commander
The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
Switch 4108GL.
To view or configure stacking on the web browser interface:
1.
Click on the
Configuration tab.
2.
Click on
[Stacking] to display the stackingconfiguration for an individual
switch, and make any configuration changes you want for that switch.
3.
Click on
[Apply Changes] to save any configuration changes for the individual
switch.
4.
If the switch is a Commander, use the
[Stack Closeup] and [Stack Management]
buttons for viewing and using stack features.
To access the web-based Help provided for the switch, click on
[?] in the web
browser screen.