IronPort Systems 4108GL - Manual (Page 399)

17-15
Monitoring and Analyzing Switch Operation
Status and Counters Data
M
o
n
ito
rin
g
an
d
A
n
al
yz
in
g
Sw
it
c
h
Op
e
ra
tio
n
Figure 17-10.Listing MAC Addresses for a Specific Port
2. Use the Space bar to select the port you want to list or search for MAC
addresses, then press
[Enter] to list the MAC addresses detected on that port.
Determining Whether a Specific Device Is Connected to the Selected
Port.
Proceeding from step 2, above:
1. Press [S] (for Search), to display the following prompt:
Enter MAC address: _
2. Type the MAC address you want to locate and press [Enter]. The address is
highlighted if found. If the switch does not find the address, it leaves the
MAC address listing empty.
3. Press [P] (for Prev page) to return to the previous per-port listing.
CLI Access for MAC Address Views and Searches
Syntax: show mac-address
[vlan ]
[ethernet]]
[]
To List All Learned MAC Addresses on the Switch, with The Port
Number on Which Each MAC Address Was Learned.
HP4108> show mac-address
To List All Learned MAC Addresses on one or more ports, with Their
Prompt for Selecting
the Port To Search