Cli: modifying the interface access, Cli: modifying the interface access -5 – IronPort Systems 4108GL User Manual
Page 107

6-5
Interface Access and System Information
Interface Access: Console/Serial Link, Web, and Inbound Telnet
In
te
rf
ac
e A
c
ce
ss
a
n
d
S
yste
m
In
fo
rm
a
tio
n
CLI: Modifying the Interface Access
Interface Access Commands Used in This Section
Listing the Current Console/Serial Link Configuration.
This com-
mand lists the current interface access parameter settings.
Syntax
:
show console
This example shows the switch’s default console/serial configuration.
Figure 6-2. Listing of Show Console Command
Reconfigure Inbound Telnet Access.
In the default configuration,
inbound Telnet access is enabled.
Syntax:
[no] telnet-server
To disable inbound Telnet access:
HP4108(config)# no telnet-server
To re-enable inbound Telnet access:
HP4108(config)# telnet-server
show console
below
[no] telnet-server
below
[no] web-management
console
Interface Access
Enable/Disable
Console Control
Options
Event Log Event
Types To List