IronPort Systems 4108GL User Manual
Page 456
A-14
File Transfers
Transferring Switch Configurations
Fil
e
T
ran
sf
e
rs
TFTP: Copying a Configuration File to a Remote Host.
Syntax:
copy
This command copies the switch’s startup configuration (startup-config file)
to a remote TFTP host.
For example, to upload the current startup configuration to a file named
sw4108 in the configs directory on drive "d" in a remote host having an IP
address of 10.28.227.105:
HP4108# copy startup-config tftp 10.28.227.105
d:\configs\sw2512
Xmodem: Copying a Configuration File from the Switch to a Serially
Connected PC or Unix Workstation.
To use this method, the switch must
be connected via the serial port to a PC or Unix workstation to which you
want to copy the configuration file. You will need to:
■
Determine a filename to use.
■
Know the directory path you will use to store the the configuration file.
Syntax:
copy
For example, to copy a configuration file to a PC serially connected to the
switch:
1.
Determine the file name and directory location on the PC.
2.
Execute the following command:
3.
After you see the above prompt, press
[Enter].
4.
Execute the terminal emulator commands to begin the file transfer.