IronPort Systems 4108GL User Manual
Page 432
18-20
Troubleshooting
Diagnostic Tools
Tr
oub
le
sho
o
ti
n
g
N o t e
To respond to a Ping test or a Link test, the device you are trying to reach must
be IEEE 802.3-compliant.
Ping Test.
This is a test of the path between the switch and another device
on the same or another IP network that can respond to IP packets (ICMP Echo
Requests).
Link Test.
This is a test of the connection between the switch and a desig-
nated network device on the same LAN (or VLAN, if configured). During the
link test, IEEE 802.2 test packets are sent to the designated network device
in the same VLAN or broadcast domain. The remote device must be able to
respond with an 802.2 Test Response Packet.