IronPort Systems 4108GL User Manual
Page 145

8-15
Time Protocols
TimeP: Viewing, Selecting, and Configuring
Ti
m
e
P
ro
toco
ls
Figure 8-12. The System Information Screen (Default Values)
2.
Press
[E] (for
Edit
). The cursor moves to the
System Name
field.
3.
Use
[v] to move the cursor to the
Time Sync Method
field.
4.
If
TIMEP
is not already selected, use the Space bar to select
TIMEP
, then
press
[v] once to display and move to the
TimeP Mode
field.
5.
Do one of the following:
•
Use the Space bar to select the
DHCP
mode, then press
[v] to move
the cursor to the
Poll Interval
field, and go to step 6.
•
Use the Space bar to select the
Manual
mode.
i.
Press
[>] to move the cursor to the
Server Address
field.
ii.
Enter the IP address of the TimeP server you want the switch to
use for time synchronization.
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None