Hyundai HI4 User Manual

Page 183

6. System setting

------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------

6 - 19

6.2.1.5 Setting the delay table

Outline

3: It sets the content about the delay signal of delay number that input in the

attribution of the output signal.

Screen display

Selection Method

① The user moves the cursor to the position where the user wants to change the

attribution. You can use "Previous [PF3]", "Next [PF4]" if there is no signal as

you want to change in the present screen.

② You press the [SET]Key after inputting the number about the On/Off delay with using

the number key in the input frame.

Reference

For example of the delay output)

ON delay: 1second, OFF delay: 0.5second
M ON M OFF
0.5sec
1sec ← →
← → +-------------------+
--------------+ +----------

You must press the "Complete"[PF5] to save the changed content after finishing

to change the output signal attribution, if press "Cancel" Key you can't save

the changed content.

14:39:38 *** Delay table *** A:0 S:4

Table Count ON delay OFF delay
16 = [

] [ 0.00]sec [ 0.00]sec

17 = [ 0] [ 0.00]sec [ 0.00]sec
18 = [ 0] [ 0.00]sec [ 0.00]sec
19 = [ 0] [ 0.00]sec [ 0.00]sec
20 = [ 0] [ 0.00]sec [ 0.00]sec
21 = [ 0] [ 0.00]sec [ 0.00]sec
22 = [ 0] [ 0.00]sec [ 0.00]sec
23 = [ 0] [ 0.00]sec [ 0.00]sec
24 = [ 0] [ 0.00]sec [ 0.00]sec
25 = [ 0] [ 0.00]sec [ 0.00]sec

Select and Enter number. Press [SET]

>[0 - 99.99]