Blackmagic Design DaVinci Resolve Studio (Dongle) - Manual (Page 65)

50
Lesson 2
Adding effects and publishing in the cut page
7 Play over the next cut away clip.
Something that maybe was not as noticeable when the clip was added, is the slight
shaking of the camera when the knife pushes down hard to cut the prawn. Fixing that
using another of the tools in the viewer toolbar is incredibly simple.
TIP You can click the circular reset button on the far right side of the viewer
toolbar to reset the parameters for the currently displayed tool.
8 Select the top view cutting board clip in the timeline.
9 In the viewer toolbar, click the camera button.
The camera button includes two tools for fixing common camera problems. Lens
correction is for fixing wide angle lens distortion and image stabilization is for
smoothing out shaky camera work.
10 Click stabilization to open the stabilization controls.
Using the default settings, the stabilizer with smooth out wobbly camera work but leave
the primary motion. This can be useful is you have a handheld shot the follows
someone around. You want to keep the general motion of the camera but want to
smooth out the bumps. In our case, we want to lock off the camera and remove all
motion as if it were on a tripod.