Setting levels in the inspector – Blackmagic Design DaVinci Resolve Studio (Dongle) User Manual
Page 230
215
R
eading Meters and Setting T
argets
7
Choose Independent.
8
Click Normalize, and play over the audio on track 1 to hear what should now be a
consistent audio level.
As the audio plays, watch the meters in the mixer. The average levels should be
bouncing around 012 dBFS. The loudest peak on the track should never go above the
target -10 dBFS.
Setting Levels in the Inspector
As you played over the track, you may have noticed that the next to last clip sounded
considerably lower than the others. Because all clips are not identical, some need
adjustments in addition to an automatic normalization.
1
Position the playhead over the 4th audio interview clip in the middle of the timeline.
2
Select the audio clip, and click the Inspector button to open the Inspector
When an audio clip is selected in the timeline, Level, Pitch, and EQ parameters are
displayed in the Inspector.