Canon imageCLASS LBP674Cdw Wireless Color Laser Printer - Manual (Page 340)

[Maintenance]
95W3-076
Carry out maintenance to clean the machine and control condensation.
* Values in bold red text are the default settings for each item.
[Clean Fixing Assembly](P. 332)
[Clean ITB](P. 332)
[Control Condensation](P. 332)
[Clean Fixing Assembly]
[Menu] [Adjustment/Maintenance] [Maintenance]
Perform this operation to clean the fixing assembly if black streaks appear on printed paper following procedures such
as toner cartridge replacement. Cleaning the Fixing Assembly(P. 397)
[Clean ITB]
[Menu] [Adjustment/Maintenance] [Maintenance]
If the printout is smudged, the transfer belt (ITB) inside the machine may be dirty. Perform this operation to clean the
transfer belt. Cleaning the Transfer Belt(P. 398)
[Control Condensation]
[Menu] [Adjustment/Maintenance] [Maintenance]
In environments subject to sudden temperature changes, condensation may form and cause images and/or text to be
faint or blurred. If so, specifying [On] may improve the print results.
During condensation removal, a blank sheet of paper may be output without printing correctly. If you set this to [On],
you can set whether to restrict printing.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation. The Auto Shutdown
Time setting is disabled.
[ Off ]
[On]
[ Allow Job Printing During Process ]
[Do Not Allow Job Printing During Process]
Settings Menu Items
332