beautypg.com

Epson Expression Photo XP-8700 Wireless All-in One Color Printer User Manual

Page 280

background image

280

LCD screen message

Condition/solution

Printing is suspended to
avoid printing on
mismatched paper.
Paper size selected on
the paper source setting
doesn't match the paper
loaded in XX.

Make sure the paper loaded in the cassette matches the print settings for the
cassette. Change the paper settings or print settings if necessary.

If you do not want to display this message, select

If occurs repeatedly

and

block this message.

Printing is suspended to
avoid printing on
mismatched paper.
Paper settings don't
match the paper loaded
in XX.

Make sure the paper loaded in the cassette matches the print settings for the
cassette. Change the paper settings or print settings if necessary.

If you do not want to display this message, select

Settings

>

Guide

Functions

>

Paper Mismatch

>

Off

.

Paper remains inside
because it is placed
sideways. Place XX size
of paper in the XX.
Press "Complete" to
remove the paper inside.

Load letter-size paper in the rear paper feed slot and select

Done

. Reload

paper in portrait orientation and center it over the arrow mark at the center of
the rear paper feed slot.

Have you loaded the
following paper in the
XX?

Load paper that matches the print settings in the location indicated, or
change the print settings to match the loaded paper.

To avoid this message, set

Settings

>

Guide Functions

>

Paper Mismatch

to

Off

.

Recovery mode

An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.

Note:

The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.

During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD screen, or lights on the control panel will advise you when these parts need replacing. If this
happens during the standard warranty of the product, the exchange of the product or replacement of the
pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced
by any Epson authorized service provider. The waste ink pads are not a user-replaceable part.