Roland TM-6 Pro Drum Trigger Module - Manual (Page 6)

6
Getting Ready
Panel Descriptions
Top Panel
4
5
6
2
1
3
7
# Controller Explanation Page
1
[MASTER] knob Adjusts the volume of the MASTER OUT jacks. –
[CLICK] knob
Adjusts the volume of the click. This can also adjust the volume of the click track
(p. 22).
p. 20
[CLICK] button
Accesses the CLICK screen. Here you can make click-related settings such as
tempo.
[SONG] knob Adjusts the volume of the song.
p. 21
[SONG] button Accesses the SONG screen. Here you can make song-related settings.
[ s ] button
Plays/stops an internal demo song or a song (audio file) on an SD card.
If the song has a click track, the click track plays simultaneously.
2
Sound modify button Selects the group of parameters that is adjusted by the sound modify knobs.
p. 26
Sound modify knobs Adjust the parameters of the group selected by the sound modify button.
3
Trigger buttons
You can use these buttons to check the sound of the instrument that is assigned to
each trigger. They are lit or blinking depending on the state of the performance or
settings.
p. 15
[RIM] button
If you press the [RIM] button to make it light, the rim is selected, allowing you
to specify an instrument for the rim or to play the rim instrument by pressing its
trigger button.
p. 15
4 [PHONES] knob Adjusts the volume of the headphones connected to the PHONES jack. –
5 [–] [+] buttons Use these buttons to switch kits or to edit values. p. 10
8
9