Roland TM-6 Pro Drum Trigger Module - Manual (Page 30)

30
Editing
5 Use the cursor buttons to select the import-
destination number, and press the [F3]
(IMPORT) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
* If you select a number in which data already exists, the
message “User Sample Exists!” appears. Select a number
that contains no data.
6 Select “OK” and then press the [ENTER]
button.
The audio file is imported.
* Never turn off the power while the screen indicates
“Processing...”
Importing all audio files of a folder at once
Here’s how all audio files in a folder can be imported as
user samples in a single operation.
1 Insert an SD card into the TM-6 PRO (p. 7).
2
Access the SAMPLE IMPORT screen (p. 29).
3 Select one of the audio files in the folder
that you want to import, and press the [F3]
(SELECT) button or the [ENTER] button.
4
Use the cursor buttons to select the starting
number of the import-destination, and
press the [F2] (IMPORT ALL) button.
The screen shows the name of the folder to be imported
entirely and the starting number of the import-
destination.
* If the import-destination region contains even one user
sample, the message “User Sample Exists! Not Enough
Space to Import All.” appears. When selecting a number,
verify that the region does not contain a user sample.
5 Press the [F3] (EXECUTE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
6 Select “OK” and then press the [ENTER]
button.
The audio files are imported.
* Never turn off the power while the screen indicates
“Processing...”
Assigning a User Sample to an Instrument
and Playing It
1 Press the [MENU] button.
2 Use the cursor buttons to select “INST,” and
then press the [ENTER] button.
3 Select the drum trigger to which you want
to assign an instrument (p. 15).
4 Move the cursor to the instrument category
of the layer that you want to assign, and use
the [–] [+] buttons to select “USER SAMPLE.”
User sample category
5
Move the cursor to the instrument name,
and use the [–] [+] buttons to select a user
sample.
6 Press the [EXIT] button several times to
return to the KIT screen.
When you strike the drum trigger to which the user
sample is assigned, the user sample is heard.