Roland TM-6 Pro Drum Trigger Module - Manual (Page 45)

45
Settings (MENU)
Viewing Information for the TM-6 PRO
Itself
Here’s how to view information for the TM-6 PRO unit itself,
such as its program version.
1 In the SYSTEM screen (p. 38), select “System
Info” and press the [ENTER] button.
The information screen appears.
2 Press a [F1] (PROG)–[F3] (SDCARD) button to
select the item that you want to edit.
Button Explanation
[F1] (PROG)
button
Displays the program version.
[F2] (SAMPLE)
button
Displays the number of loaded
user samples and the remaining
amount of space for user samples
in user memory.
[F3] (SDCARD)
button
Displays the number of backup
data and kit backup data that are
saved on the SD card.
3
Press the [EXIT] button several times to
return to the KIT screen.
Returning to the Factory Settings
The “Factory Reset” operation returns all data and settings
stored in the TM-6 PRO to their factory-set condition.
NOTE
When you execute this operation, all data and settings
in the TM-6 PRO will be lost. Before you proceed, you
should save any important data and settings to your SD
card (p. 39).
Returning to the factory settings
including the user samples
Even if you execute a factory reset, deleted preload
user samples and parameters for the user samples
(p. 31) do not return to their factory-set condition.
Insert the SD card containing a backup of the factory-
set data, and then load the data as described in
“Loading backup data from an SD card” (p. 39).
You can download the factory-set data from the
Roland website.
http://www.roland.com/support/
1 In the SYSTEM screen (p. 38), select “Factory
Reset” and press the [ENTER] button.
The FACTORY RESET screen appears.
2 Press the [F3] (FACTORY RESET) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
3 Select “OK” and then press the [ENTER]
button.
The “Factory Reset” operation will be executed.