Roland TM-6 Pro Drum Trigger Module - Manual (Page 31)

31
Editing
Viewing a List of User Samples
Here’s how to view a list of all currently-loaded user samples.
1 Press the [USER SAMPLE] button.
2 Use the cursor buttons to select “LIST,” and
then press the [ENTER] button.
The SAMPLE LIST screen appears.
Play type icon
: Play once (mono)
: Play once (poly)
: Play as a loop
Button Explanation
[F1] (PREVIEW)
button
Plays the selected user sample.
To stop playback, press the [F1]
(PREVIEW) button once again
during playback.
[F2] (DELETE)
button
Deletes the selected user sample.
[F3] (EDIT) button
Lets you edit the user sample
(e.g., play/stop position settings,
playback method (play type)).
MEMO
You can use the cursor [<] [>] buttons to move the cursor
in larger steps.
Editing a User Sample
You can specify settings such as the position at which a
user sample plays and stops, and how playback occurs
(play type).
Specifying how the user sample is sounded
You can specify how the user sample is sounded when you
strike a drum trigger, for example whether it sounds only
once or repeatedly.
You can also adjust the volume of a user sample.
1 From the user sample list, select the user
sample for which you want to make the
setting (p. 31).
2 Press the [F3] (EDIT) button.
3 Use the cursor buttons to select “Play Type/
Gain,” and then press the [ENTER] button.
The PLAY TYPE/GAIN screen appears.
Parameter Value Explanation
Sample Gain
-12–+12
[dB]
Adjusts the volume of a
user sample.
Play Type
ONESHOT
MONO
When you strike the
drum trigger, the
currently-heard sound is
silenced before the new
sound is heard. Notes do
not overlap (mono).
ONESHOT
POLY
When you strike the
drum trigger repeatedly,
the sounds of the notes
are heard overlapping
(poly).
LOOP ALT
The user sample plays
repeatedly (loop).
Each time you strike the
drum trigger, the sound
alternately plays or stops.
[F1] (PREVIEW)
button
Plays the user sample with the current
settings. During playback, press the
[F1] (PREVIEW) button once again to
stop.
4 Use the cursor buttons and the [–] [+]
buttons to edit the settings.
MEMO
You can also use all sound off (p. 10) to stop the sound of
a user sample that is “stuck” in the playing state.
Specifying the sounded region of a user
sample
You can specify the region of a user sample that is actually
sounded.
1 From the user sample list, select the user
sample for which you want to make the
setting (p. 31).
2 Press the [F3] (EDIT) button.
3 Use the cursor buttons to select “Adjust
Start/End” and then press the [ENTER]
button.
The START/END screen appears.