Roland TM-6 Pro Drum Trigger Module - Manual (Page 33)

33
Convenient Functions
Comparing or Returning to the Unedited
Kit (Undo)
You can listen to the difference between the current
settings and the settings just after the kit was selected, or
return to the unedited settings (Undo).
Edit
Immediately after
selecting kit (UNDO)
Current kit
(CURRENT)
1 Select the kit that you want to edit.
When you select a kit, the data of the selected kit is
saved in UNDO.
2 Edit the kit.
3 In the KIT screen (p. 20), press the [F2]
(TOOLS) button.
4 Use the cursor buttons to select “Undo” and
then press the [ENTER] button.
The UNDO screen appears.
Comparing the sound
Use the cursor buttons to switch between the kits while
you perform, and listen to the difference.
Parameter Explanation
CURRENT Current kit settings
UNDO
Settings immediately after
selecting the kit
Keeping the current kit settings unchanged
Press the [EXIT] button several times to return to the KIT
screen.
Returning to the settings just after the kit was selected
Proceed as follows.
5 Select “UNDO” and then press the [F3]
(RESTORE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
6 Select “OK” and then press the [ENTER]
button.
The current kit settings return to the settings of just after
the kit was selected.
7 Press the [EXIT] button several times to
return to the KIT screen.
Copying Settings (Copy)
The TM-6 PRO lets you copy various types of settings from
internal memory or from an SD card.
You can also exchange settings between the copy-source
and copy-destination.
NOTE
When you execute a copy, the content at the copy-
destination is overwritten. If you want to keep those
settings, back them up to an SD card beforehand (p. 39).
1 In the KIT screen (p. 20), press the [F2]
(TOOLS) button.
2 Use the cursor buttons to select “Copy” and
then press the [ENTER] button.
The COPY screen appears.
3
Use the cursor buttons to select a copy
menu item, and press the [ENTER] button.
Copy menu Explanation
KIT Copy a kit.
PAD
Copy the settings of a pad, such as
instrument assignments and pad
effect settings.
TRIGGER Copy a trigger bank.
4 Copy the settings according to the menu
item that you selected.
Example) Copying a kit (KIT)
1 In the COPY screen, select “KIT” and press
the [ENTER] button.
The COPY KIT screen appears.
2 Use the cursor buttons to select the memory
that you want to copy, and press the [ENTER]
button.
Parameter Explanation
USER
Copies from user memory. Only if
the copy-source is user, you can
exchange the copy-source and
copy-destination.