Roland TM-6 Pro Drum Trigger Module - Manual (Page 26)

26
Editing
1 Press the [MENU] button.
The MENU screen appears.
2 Use the cursor buttons to select “KIT-FX,”
and then press the [ENTER] button.
The KIT EFFECT screen appears.
3 Use the cursor buttons to select the kit
effect that you want to edit, and press the
[ENTER] button.
The kit effect editing screen appears.
4 Edit the effect settings.
5 Press the [EXIT] button several times to
return to the KIT screen.
MASTER EQ settings
1 In the KIT EFFECT screen (p. 26), select
“MASTER EQ” and press the [ENTER] button.
The MASTER EQ screen appears.
2 Press the [F3] (EQ ON/OFF) button to switch
the effect on/off.
3 Use the cursor buttons and the [–] [+]
buttons to edit the settings.
You can edit the LOW (low frequency), MID1
(mid frequency), MID2 (mid frequency), and HIGH
(high frequency) ranges individually.
Parameter Explanation
TYPE (LOW and
HIGH only)
How the equalizer is applied
Q
Width of the frequency band
Higher values make the width
narrower.
FREQ Center frequency
GAIN Amount of boost or cut
4 Press the [EXIT] button several times to
return to the KIT screen.
Using the Sound Modify Knobs
You can use the sound modify knobs to adjust the
parameters of the instrument or the pad effect.
1
Select the drum trigger that you want to
edit (p. 15).
2 Press the sound modify button to select the
parameters that you want to edit.
Instrument parameters (upper indicator is lit)
Parameter Explanation
Volume Volume of the instrument
Pitch Pitch of the instrument
Decay Length of the instrument's decay
MEMO
5 The sound modify knobs adjust the parameters for
both instruments A and B simultaneously.
5 In the INST EDIT screen (p. 24), you can edit
instruments A and B individually by holding down the
[ENTER] button and turning a sound modify knob.
Pad effect parameters (lower indicator is lit)
Parameter Explanation
Transient Attack
Attack adjustment
This lets you emphasize or reduce
the attack portion.
Transient Release
Release adjustment
This lets you emphasize or reduce
the release portion.
MFX Control
Multi-effect control
The parameter that is controlled
depends on the multi-effect that is
selected.
The PAD MFX screen shows the
parameters that can be controlled.
Parameters indicated by “(#)”