Roland TM-6 Pro Drum Trigger Module - Manual (Page 29)

29
Editing
2 Use the cursor buttons and the [–] [+]
buttons to edit the settings.
Parameter Value Explanation
Kit Tempo
Switch
OFF
Use a common tempo for the
entire TM-6 PRO (p. 20).
The tempo does not change
when you switch kits.
ON
Use the tempo specified by
each kit.
This lets you specify the click
tempo and the tempo of
tempo-synchronized effects
individually for each kit.
Kit Tempo 20–260 Kit tempo
3 Press the [EXIT] button several times to
return to the KIT screen.
MEMO
If kit tempo is “ON,” and the tempo you specify in the
CLICK screen is different than the kit tempo, the tempo
in the KIT screen is indicated as “*” ( ).
Renaming the Kit
Here’s how to rename the currently selected kit.
1 Access the KIT COMMON screen (p. 27).
2 Use the cursor buttons to select “KIT NAME,”
and then press the [ENTER] button.
The KIT NAME screen appears.
3
Edit the name.
You can enter a kit name (upper line) of up to 11
characters, and a sub-name (lower line) of up to 16
characters.
Controller Explanation
Cursor buttons
Move the cursor to the
character that you want to
change.
[–] [+] buttons Change the character.
[F1] (INSERT) button
Insert a space at the cursor
location.
[F2] (DELETE) button
Delete the character at the
cursor location.
[F3] (A A a A 1) button
Move to the first uppercase
character, lowercase
character, or numeral.
4 Press the [EXIT] button several times to
return to the KIT screen.
Importing and Playing Audio Files
(USER SAMPLE)
Audio files that you created on your computer can be
imported from an SD card into the TM-6 PRO, and played as
instruments (user sample function). You can edit the sound
of a user sample or apply effects to it in the same way as
other instruments.
Audio files that can be loaded by the
TM-6 PRO
WAV
Format (extension) WAV (.wav)
Sampling frequency 44.1 kHz
Bit rate 16, 24-bit
Time (for each file) Maximum 180 seconds
Number of files Maximum 1,000 files
Total length of sound
(maximum)
Mono: 48 minutes
Stereo: 24 minutes
* File names or folder names that contain more than
15 characters are not shown correctly. Files and
folders using double-byte characters are also not
supported.
Importing an Audio File
Here’s how you can import an audio file into the TM-6 PRO
as a user sample.
1 Insert an SD card into the TM-6 PRO (p. 7).
2 Press the [USER SAMPLE] button.
3 Use the cursor buttons to select “IMPORT,”
and then press the [ENTER] button.
The SAMPLE IMPORT screen appears.
4 Select an audio file, and press the [F3]
(SELECT) button or the [ENTER] button.
Button Function
[ ] [ ] buttons Moves cursor
[<] [>] buttons Enters a folder/Exits a folder
[F1] (PREVIEW) button
Plays back the selected
audio file.
[F2] (FOLDER UP) button Exits a folder
[F3] (SELECT) button/
[ENTER] button
Enters a folder/Specifies a file