Roland TM-6 Pro Drum Trigger Module - Manual (Page 27)

27
Editing
3 Turn a sound modify knob to edit the
parameter.
The value of the parameter you’re editing is shown in a
popup.
While the popup is shown, you can press a function
button to edit the settings of the instrument.
Example) Pitch
Button Explanation
[F1] (H&R) button
Specifies whether the head and
rim are edited together as a set or
edited individually (p. 24).
[F2] (EDIT) button
Moves to a screen for making
detailed edits to the instrument
parameters.
[F3] (INIT) button
Returns the Pitch setting to its
initial value “0.”
MEMO
5 The parameters that you can edit here can also be
edited from the instrument or pad effect editing
screen.
5 While the popup is shown, you can press the [EXIT]
button to dismiss the popup.
Disabling the sound modify knobs (sound
modify lock)
To prevent parameter values from changing even if you
inadvertently touch the sound modify knobs, such as during
a live performance, you can lock the knobs (sound modify
lock).
Hold down the [ENTER] button and press the sound modify
button to turn the sound modify lock function on or off.
If you turn a sound modify knob while this is locked, the
current parameter value is shown.
Blinking
Reference
You can also set the sound modify lock function from
MENU. For details, refer to “Other Settings” (p. 44).
Editing a Kit
Here you can make settings such as the kit’s overall volume
and the kit name.
Reference
For details on the parameters that can be edited, refer to
“Data List” (PDF).
Editing the Kit’s Volume
Here’s how to set the volume of the kit.
MEMO
From the KIT screen, you can also access the KIT VOLUME
screen by pressing the [F3] (KIT VOL) button.
1
Press the [MENU] button.
The MENU screen appears.
2 Use the cursor buttons to select “KIT
COMMON,” and then press the [ENTER]
button.
The KIT COMMON screen appears.
3 Use the cursor buttons to select “KIT
VOLUME,” and then press the [ENTER]
button.
4 In the KIT VOLUME screen (KITVOL tab), use
the [–] [+] buttons to change the value.
Adjust this so that each output does not exceed clip level
(0 dB) when you strike the drum trigger.
Value -INF–+6.0 dB
5 Press the [EXIT] button several times to
return to the KIT screen.
MEMO
From the KIT screen, you can also move to the KIT
VOLUME screen by pressing the [F3] (KIT VOL) button.