Roland TM-6 Pro Drum Trigger Module - Manual (Page 42)

42
Settings (MENU)
Specifying the Output for USB Audio
You can specify the output destination of the USB audio
that is sent from the USB COMPUTER port.
Eight channels from the USB audio output can be multi-
track recorded into a DAW on your computer.
MEMO
For details on settings in your DAW, refer to the owner’s
manual of the DAW you’re using.
Specifying the output destination for USB
audio
The sound that is output to each channel of USB audio
corresponds to the output jacks of the TM-6 PRO module.
This means that sound is output to each USB audio channel
according to the settings of the PAD OUTPUT ASSIGN screen
(p. 38).
USB channel Corresponding output jack
Ch1 PHONES OUT (L)
Ch2 PHONES OUT (R)
Ch3 MASTER OUT L
Ch4 MASTER OUT R
Ch5 DIRECT OUT 1
Ch6 DIRECT OUT 2
Ch7 DIRECT OUT 3
Ch8 DIRECT OUT 4
Adjusting the USB audio output level
1 In the SYSTEM screen (p. 38), select “USB
Setup” and press the [ENTER] button.
The USB SETUP screen appears.
2 Press the [F2] (SETUP) button.
3 Move the cursor to Output Gain, and use the
[–] [+] buttons to change the value.
Parameter Value Explanation
Output Gain -24–+24dB
Adjusts the output level
This applies to all USB
audio output that is
sent from the USB
COMPUTER port.
4 Press the [EXIT] button several times to
return to the KIT screen.
Specifying the Input for USB Audio
Here’s how to specify the USB audio input that is input to
the USB COMPUTER port.
This allows audio that is played back by the computer to be
heard from the TM-6 PRO.
MEMO
The sound of each USB audio channel is also output from
the corresponding output jack of the TM-6 PRO module.
USB channel Corresponding output jack
Ch1 PHONES OUT (L)
Ch2 PHONES OUT (R)
Ch3 MASTER OUT L
Ch4 MASTER OUT R
Ch5 DIRECT OUT 1
Ch6 DIRECT OUT 2
Ch7 DIRECT OUT 3
Ch8 DIRECT OUT 4
1 In the SYSTEM screen (p. 38), select “USB
Setup” and press the [ENTER] button.
The USB SETUP screen appears.
2
Press the [F2] (SETUP) button.
3 Use cursor buttons to select a parameter,
and use the [–] [+] buttons to edit the value.
Parameter Value Explanation
Input Gain -36–+12dB
Adjusts the input level
This affects all USB audio
inputs that are input
via the USB COMPUTER
port.
Volume
Select
PHONES,
MASTER,
DIRECT1–2,
DIRECT3–4
Specifies the knob that adjusts the
input volume of USB audio (PHONES,
MASTER, DIRECT1–2, DIRECT3–4).
OFF
The volume is not
adjusted by a knob.
SONG
The [SONG] knob adjusts
the volume.
CLICK
The [CLICK] knob adjusts
the volume.
4 Press the [EXIT] button several times to
return to the KIT screen.