Roland TM-6 Pro Drum Trigger Module - Manual (Page 22)

22
Performing
Changing the Settings of Each Song
Here’s how to specify the volume of the song and the click
track, and how they play back.
1 Select a song (p. 21).
2 Press the [ENTER] button.
The SONG SETUP screen appears.
3 Use the cursor buttons, [–] [+] buttons, and
function buttons to make settings for the
song.
Parameter Value Explanation
Play Type
ONE SHOT
Play back only once and
then stop.
LOOP Play repeatedly.
Song
Volume
-INF–+6.0
[dB]
Song volume
Click Trk
Volume
Click track volume
Only if there is a click
track corresponding to
the song
Button Explanation
[F1] (PAD/FS CTRL)
button
You can assign a footswitch or
drum trigger to execute functions
such as song play/stop (p. 43).
[F3] (CLK TRK ON)
button
Turn click track playback on/off.
* Only if there is a corresponding
click track for the song
4 Press the [EXIT] button to return to the
SONG screen.
Playing an Audio File as a Click (Click Track)
Separately from the song, you can prepare an audio file
(WAV file) and play it back as a click (click track).
Since the click track can play simultaneously with the song,
it’s convenient when you want a desired click sound to play
back along with the song.
* To play back a click track, you must prepare a song
and a click audio file in WAV format. MP3 files are not
supported.
MEMO
The internal demo songs provide a click track.
Preparing a click track audio file
1 Prepare the audio file (WAV file) that you
want to play as a song and the audio file
(WAV file) that you want to play as a click
track.
Use commercially available DAW software etc. to create a
click track that matches the tempo of your song.
2 On your computer, edit the file name of the
file that you prepared in step 1.
Specify “song file name+ _Click ” as the name of the audio
file that you want to play as the click track.
Example)
If you want the click track to play back along with a song
named “TM-6PRO.wav” then you would specify “TM-
6PRO_Click.wav” as the name of the click audio file.
3 Save the audio file of the song and the
audio file of the click track in the same level
of the SD card.
In the case of the example, save “TM-6PRO.wav” and
“TM-6PRO_Click.wav” in the same level.