Roland TM-6 Pro Drum Trigger Module - Manual (Page 38)

38
Settings (MENU)
Button Explanation
[F2] (CTRL)
button
Here you can make settings
for the MIDI messages that are
transmitted or received to indicate
the depth to which the hi-hat
pedal is pressed, and settings for
MIDI synchronization.
[F3] (PRGCHG)
button
Lets you freely specify the
correspondence between kits and
the program changes that are
transmitted and received.
4 Use cursor buttons to select a parameter,
and use the [–] [+] buttons to edit the value.
5 Press the [EXIT] button several times to
return to the KIT screen.
Settings for the Entire TM-6 PRO
Here’s how to make settings that apply to the entire
TM-6 PRO, such as output destination assignments or
footswitch assignments.
1 Press the [MENU] button.
The MENU screen appears.
2 Use the cursor buttons to select “SYS,” and
then press the [ENTER] button.
The SYSTEM screen appears.
3 Use cursor buttons to select the item for the
settings that you want to make, and then
press the [ENTER] button.
Menu Explanation
Output Assign
Specifies the output destination of
the sounds.
SD Card
Saves (backs up) settings from the
TM-6 PRO to an SD card, or loads
backed-up settings from an SD card
into the TM-6 PRO.
USB Setup
Makes settings for the USB driver
and USB audio (p. 41).
Control Setup
Assigns functions to the footswitch
and drum triggers (p. 43).
Options
Makes settings for the display and
for sound modify lock (p. 44).
Auto Off Makes AUTO OFF settings (p. 44).
System Info
Displays information about the
TM-6 PRO itself, such as the
program version (p. 45).
Factory Reset
Returns the TM-6 PRO to its factory
settings (p. 45).
4 Edit the settings of the menu that you
selected.
5 Press the [EXIT] button several times to
return to the KIT screen.
Audio Output Assignments
Here’s how to specify the output destination (MASTER OUT
jacks, DIRECT OUT jacks, PHONES jack) of the sound.
MEMO
5 The output destination setting for USB audio (p. 42)
is shared with the output destination setting of the
MASTER OUT jacks and the DIRECT OUT jacks.
5 For details on the parameters that can be edited, refer
to “Data List” (PDF).
1 In the SYSTEM screen, select “Output
Assign” and press the [ENTER] button.
Displays the output settings screen.
MASTER OUT
jack settings
DIRECT OUT
jack settings
Trigger input number
If you select
DIRECT1, the sound
is output in mono to
DIRECT1.
If you select DIRECT
1+2, the L-channel is
output to DIRECT1
and the R-channel is
output to DIRECT 2.
2 Use the cursor buttons, [–] [+] buttons, and
function buttons to make output settings.
Button Explanation
[F1] (PAD) button
Specifies the output destination of
each drum trigger’s sound.
[F2] (OTHER)
button
Specifies the output destination
of the reverb (kit effect), song, and
click (including the click track).
[F3] (SETUP)
button
Specifies the output level etc. of
each output jack.
3 Press the [EXIT] button several times to
return to the KIT screen.