Roland TM-6 Pro Drum Trigger Module - Manual (Page 28)

28
Editing
Editing the Hi-Hat’s Volume
Here’s how to set the volume of the hi-hat.
1 In the KIT COMMON screen (p. 27), select
“KIT VOLUME” and press the [ENTER] button.
2 In the HI-HAT VOLUME screen (HIHAT tab),
use the cursor buttons and the [–] [+]
buttons to edit the values.
Strike the hi-hat, and adjust its volume balance relative
to the other outputs.
Parameter Value Explanation
PedalHH Vol
-INF–
+6.0dB
Volume of pedal hi-hat
HH Open/
Close
Balance
-5–+5
Open/close volume
balance
3 Press the [EXIT] button several times to
return to the KIT screen.
MEMO
From the KIT screen, you can also move to the HI-HAT
VOLUME screen by pressing the [F3] (KIT VOL) button.
Muting the Sound of a Specific Drum Trigger
When You Strike a Drum Trigger (Mute Group)
Mute group settings let you specify that when you strike a
drum trigger, other drum triggers in the same mute group
are muted (silenced).
For example, you could assign user samples to the
instruments of each drum trigger, and make mute group
settings so that you can switch between user samples by
striking different drum triggers.
1
In the KIT COMMON screen (p. 27), select
“MUTE GROUP” and press the [ENTER]
button.
The MUTE GROUP screen appears.
2 Select the drum trigger that you want to
edit (p. 15).
You can also use the cursor buttons to select a drum
trigger.
3 Use the cursor buttons and the [–] [+]
buttons to make mute group settings.
Parameter Value Explanation
MUTE SEND
– (OFF),
1–8
Specify the mute group
number.
When you strike the drum
trigger of the number
specified in MUTE SEND, the
sound of the drum trigger
assigned to the same number
in MUTE RECEIVE is muted.
* Even if you specify the same
number in MUTE SEND and
MUTE RECEIVE for the same
location (e.g., head or rim)
of the same drum trigger,
muting does not occur.
MUTE
RECEIVE
When you specify a mute group, an arrow indicates
the drum triggers that are muted when you strike the
currently selected drum trigger, and the drum triggers
that when struck will mute the currently selected drum
trigger.
MEMO
To clear all mute groups, press the [F3] (RESET) button.
4 Press the [EXIT] button several times to
return to the KIT screen.
Specifying the Tempo for Each Kit
(Kit Tempo)
When you select a kit, the tempo you specify here is
automatically applied.
1 In the KIT COMMON screen (p. 27), select
“KIT TEMPO” and press the [ENTER] button.
The KIT TEMPO screen appears.