Roland TM-6 Pro Drum Trigger Module - Manual (Page 40)

40
Settings (MENU)
4 Make load settings.
Parameter Explanation
User Sample
Choose whether user samples will
also be loaded.
Bank Select the backup number.
* If you load user samples, the user samples in the TM-6 PRO
are overwritten by the user samples that are included in
the backup data. Also, depending on the size of the user
samples, it might take several minutes to load the data.
5 Press the [F3] (EXECUTE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
6 Select “OK” and then press the [ENTER]
button.
The backup data is loaded from the SD card.
7 Press the [EXIT] button several times to
return to the KIT screen.
Deleting backup data from an SD card
Here’s how to delete unneeded backup data (including user
samples) from an SD card.
1 Insert an SD card into the TM-6 PRO (p. 7).
2 In the SYSTEM screen (p. 38), select “SD
Card” and press the [ENTER] button.
The SD CARD screen appears.
3 Use the cursor buttons to select “Delete,”
and then press the [ENTER] button.
The SD CARD DELETE screen appears.
4 Use the function buttons and the [–] [+]
buttons to select the data that you want to
delete.
Button Explanation
[F1] (BACKUP)
button
Deletes backup data.
[F2] (1 KIT)
button
Deletes kit backup data.
Parameter Explanation
Bank (when using
BACKUP)
Select the backup number that you
want to delete.
SD Card (when
using 1 KIT)
Select the kit backup number that
you want to delete.
5 Press the [F3] (EXECUTE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
6 Select “OK” and then press the [ENTER]
button.
The backup data is deleted from the SD card.
7 Press the [EXIT] button several times to
return to the KIT screen.
Checking the usage status of an SD card
Here’s how to check the number of settings that are saved
on the SD card.
1 Insert an SD card into the TM-6 PRO (p. 7).
2
In the SYSTEM screen (p. 38), select “SD
Card” and press the [ENTER] button.
The SD CARD screen appears.
3 Use the cursor buttons to select “SD Card
Info,” and then press the [ENTER] button.
The SD CARD INFO screen appears.
Parameter Explanation
Backup All Number of saved backup data
Backup 1 Kit Number of saved kit backup data
4 Press the [EXIT] button several times to
return to the KIT screen.
Formatting an SD card
Here’s how to initialize (format) an SD card.
* Before using an SD card for the first time, you must use
the TM-6 PRO to initialize (format) the card.
NOTE
When you initialize an SD card, all data on the SD card is
erased.
1 Insert an SD card into the TM-6 PRO (p. 7).
2 In the SYSTEM screen (p. 38), select “SD
Card” and press the [ENTER] button.
The SD CARD screen appears.