Samsung S95C 77" 4K HDR Quantum Dot OLED TV - Manual (Page 194)

Sound and Noise Issues
When the TV has difficulties with sound, these steps may help resolve the problem.
How can I connect an audio device to the TV?
The connection method may differ depending on the audio device, such as HDMI (eARC), Optical, Bluetooth, and Wi-
Fi.
For more information about how to connect an audio device, run Connection Guide .
• Menu Connected Devices Connection Guide Audio Device
There is no sound or the sound is too low at maximum volume.
Check the volume control of your TV, and then check the volume control of the external device (cable box or
satellite box, DVD, Blu-ray, etc.) connected to your TV.
Check the cable connection between an external device and the TV and then try cable connection again.
The picture is good but there is no sound.
Check the Sound Output setting. If it is set to TV Speaker , check the volume setting.
• Menu Settings All Settings Sound Sound Output Try Now
If you are using an external device, check the device’s audio output option.
For example, you may need to change your cable box’s audio option to HDMI if the box connected to your TV is using
an HDMI cable.
To listen to computer sound, connect an external speaker to the computer’s audio output connector.
If your TV has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by disconnecting and then reconnecting the device’s power cable.
With a set-top box or cable box, check the cable connection and reboot the external device. When the symptom
persists, contact your service provider.
HDMI (eARC) is connected, and there is no sound.
Check whether Digital Output Audio Format is set to Pass-Through .
If a sound bar or A/V receiver that does not support Dolby Digital+ is used and Pass-Through is selected, there is no
sound when a Dolby Digital+ source is received.
It is recommended to set Digital Output Audio Format to Auto if only limited audio format is supported depending
on the performance of the connected sound bar or A/V receiver.
• Menu Settings All Settings Sound Expert Settings Digital Output Audio Format Auto
- 194 -