Samsung S95C 77" 4K HDR Quantum Dot OLED TV - Manual (Page 136)

• Digital Output Audio Delay Try Now
Adjust the output delay time for digital audio.
This feature is only available when the external device is connected via HDMI (ARC), HDMI (eARC) and SPDIF (Sony
Philips Digital Interface).
This function may not be supported depending on the model.
• Dolby Atmos Compatibility
You can set the TV to allow Dolby Digital+ with Atmos streams that are input from external devices.
Set to On if the audio device connected via HDMI (eARC) supports Dolby Atmos. The TV screen may flicker when
this function is turned on or off.
If this function is on, set Digital Output Audio Format to Auto .
This function may not be supported depending on the model.
• Dolby Atmos
Set to On if the audio device connected via the HDMI (eARC) port supports Dolby Atmos. When the option is set
to On , Dolby Digital+ with Atmos stream, sent from an external device, can be received. If you change the setting
when the input source is set to HDMI, the screen may flicker. If this function is on, set Digital Output Audio
Format to Auto .
When watching TV using the embedded speakers, the virtual surround sound effect of Dolby Atmos can be
turned on or off. If the TV has been installed in portrait mode by using separate accessories, the virtual surround
sound effect through the TV speakers does not work.
This function may not be supported depending on the model.
• Auto Volume Try Now
Automatically adjusts the sound to a certain level when changing channels or switching to another external
input.
• Sound Feedback Try Now
Plays the notification sound when manipulating a menu or selecting an option.
• Simultaneous Optical Output
The device connected via optical always outputs sound.
• Reset Sound Try Now
Reset changed sound settings.
- 136 -