Samsung S95C 77" 4K HDR Quantum Dot OLED TV - Manual (Page 134)

Using Cable Box IP Remote
Menu Settings All Settings Connection External Device Manager Cable Box IP
Remote
Try Now
Set the cable box that supports IP control to be controlled with Samsung remote control.
This function may not be supported depending on the model.
Using Input Signal Plus
Menu Settings All Settings Connection External Device Manager Input Signal
Plus
Try Now
Expands the input signal range for HDMI connections.
If the Input Signal Plus feature is turned off, HDR signals sent from an external device cannot be received.
When you select the HDMI connector you want to use for Input Signal Plus , and then press the Select button to set the
Input Signal Plus function to On , the TV screen may flicker.
When you connect the TV to an external device that supports only the UHD 24 Hz or UHD 30 Hz frequency, or any FHD
frequency, the
Input Signal Plus function may not be available. In this case, turn off the Input Signal Plus function.
For more information about the supported UHD resolutions, refer to "Supported Resolutions for UHD Input Signals."
For more information about the supported 8K resolutions, refer to "Resolutions for Input Signals supported by 8K models
(QN7**B series or higher)."
Using HDMI Black Level
Menu Settings All Settings Connection External Device Manager HDMI Black
Level
Try Now
Use HDMI Black Level to adjust the black level to compensate for low black levels, low contrast, or dull colors
generated by external devices connected to the TV via an HDMI cable.
This function is only available when the input signal connected to the TV via an HDMI connector is set to RGB444.
- 134 -