KACO Powador XP500-XP550-HV TL outdoor - Manual (Page 27)

Page 28 Operating Instructions Powador XP500/550-OD-TL
S t o r a g e / I n s t a l l a t i o n / S t a r t - u p
1
1, 2, 3
1
2
Figure 18: Cabinet (interior view)
Key
1 Fuse F30, 31, 34, 35, 36, 38, 39
Circuit breakers CB32, 40
2 Circuit breakers MCB20, 21
Circuit breakers CB20
3 Circuit breaker CB37
When voltage is present at the inverter, it can be started up. Use the HMI interface to start up the inverter.
The inverter begins operation in a specifi ed sequence. For more information, see section 5.2 (“Transporting
the unit to the installation location”).
If a fault occurs, the inverter cannot begin operation. For more information on faults, see section 6 (“Faults
and Warnings”).
NOTE
If the fault cannot be reset using “Fault reset”, please contact our service depart-
ment.