Yaskawa JAPMC-MC2303-E - Manual (Page 53)

3
Mounting and Starting the Module
3.5 Starting the MPE720 and Setting Communication or Network Parameters
3.5.2 Starting MPE720 Ver. 5. †† and Setting the Network
3-23
Enter the IP address of the personal computer and click the OK Button.
Enter the network number and station number and click the OK Button.
ΠEnter the same network number and station number as the ones set with the Communication Manager.
6. A confirmation dialog box will be displayed. Click the Yes Button. This completes selecting the logical
port.
These transmission definition settings are required for each Communication Module. Refer to Machine Controller
MP2000 Series Communication Module User’s Manual (Manual No.: SIEPC88070004) for details on the transmission
definition settings
.