Yaskawa JAPMC-MC2303-E - Manual (Page 169)

Appendix D Supplement on FL-net Profile
D.1 262IF-01 Profile
A-19
App
Appendices
Appendix D Supplement on FL-net Profile
D.1 262IF-01 Profile
( 1 ) Device-common Parameters
The following describes device-common parameters in detail.
∗ The following describes the parameters for device type.
PC or PLC: Programmable Logic Controller
NC or CNC: Numeric control equipment
RC or ROBOT: Robot controller
COMPUTER: Personal computer, panel computer, workstation, intelligent display computer
SP.*..*: To be specified as a vendor-specific SP by vendor (.*..* is an alphanumeric character.)
OTHER: Others
The transfer syntax requires that system parameters, common parameters, system parameter change dates and device-
specific parameters (options) are all given in SEQUENCE structures. (Perform structuring within device-specific
parameters arbitrarily.)
( 2 ) Device-specific Parameter
The following describes device-specific parameters in detail.
The above device-specific parameters are not used in 262IF-01.
Parameter Name
Name Character
[PrintableString type]
(Length), (Character)
Data Type
[Type]
Example of Parameter
Descriptions
(For 262IF-01)
(Length), (Contents)
Device profile common
specification version
6, “COMVER” INTEGER 1, 1
System parameter
identification character
2, “ID” PrintableString 7, “SYSPARA”
System parameter change
number
3, “REV” INTEGER 2, 0†0100
System parameter change
date
7, “REVDATE”
[INTEGER],2,(0001 to 9999)
[INTEGER],1,(01 to 12)
[INTEGER],1,(01 to 31) 2, 2007
1, 9
1, 27
Device type 10, “DVCATEGORY” PrintableString 2, “PC”*
Vendor name 6, “VENDER” PrintableString 7, “YASKAWA”
Product model 7, “DVMODEL” PrintableString 16, “JAPMC-CM2303 ”
Parameter Name Name Character Data Type
Example of Parameter
Descriptions
(Length), (Contents)
Device-specific parameter
identification character
2, “ID” PrintableString 7, “DEVPARA”
The contents can be freely defined by the vendor.