Yaskawa JAPMC-MC2303-E - Manual (Page 24)

2
Overview of 262IF-01 Module
2.1 Overview of 262IF-01 Module
2.1.1 Module Specifications
2-5
( 3 ) Operating Environment Specifications
Item Specifications
Environmental
Conditions
Ambient Operat-
ing Temperature
0 to +55 °C
Ambient Storage
Temperature
–25 to +85 °C
Ambient Operat-
ing Humidity
30 % to 95% (with no condensation)
Ambient Storage
Humidity
5 % to 95% (with no condensation)
Pollution Level Pollution level: 2 (conforming to JIS B3502)
Corrosive Gas There must be no combustible or corrosive gas.
Operating
Altitude
2,000 m above sea level or lower
Mechanical
Operating
Conditions
Vibration
Resistance
Conforming to JIS B3502
(1) Frequency: 16.7 Hz
Vibration strength: 14.7 m/s 2
(2) Frequency: 10 to 57 Hz Vibration strength: 0.075 mm of single-ampli
tude
(3) Frequency: 57 to 150 Hz Vibration strength: 9.8 m/s 2 of fixed acceleration
Shock Resistance
Conforming to JIS B3502
Peak acceleration of 147 m/s
2 (15G) twice for 11 ms each in the X, Y, and Z
directions
Electrical
Operating
Conditions
Noise Resistance
Conforming to EN 61000-6-2, EN 55011 (Group 1 Class A)
Power supply noise (FT noise):
±2 kV min., for one minute
Radiation noise (FT noise): ±1 kV min., for one minute
Ground noise (impulse noise): ±1 kV min., for ten minutes
Electrostatic noise (contact discharge method): ±6 kV min., ten times
Installation
Requirements Ground Ground to 100 Ω max.
Cooling Method Natural cooling