Yaskawa JAPMC-MC2303-E - Manual (Page 3)

iii
Using this Manual
Read this manual thoroughly before using 262IF-01. This manual describes MP2000 Series Machine Controller FL-net
Communication Module 262IF-01. Keep this manual in a safe place for future reference.
„
Basic Terms
Unless otherwise specified, the following definitions are used:
„
Manual Configuration
This manual consists of the chapters listed in the following table. Read the chapters of this manual as required by the
purpose.
„
Graphic Symbols Used in this Manual
The graphic symbols used in this manual indicate the following type of information.
„
Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a forward slash (/) before
the signal name, as shown in the following example:
• MP2000 Series Machine Controller:
MP2100M, MP2200, MP2300, MP2310, MP2300S, and MP2500MD
Machine Controllers
• PLC: Programmable Logic Controller
• MPE720:
The Programming Device Software or a personal computer running the Pro-
gramming Device Software
Purpose
Chapter
Selecting
Models and
Peripheral
Devices
Studying
Specifications
and Ratings
Designing
the
System
Panel
Installation
and Wiring
Trial
Operation
Maintenance
and
Inspection
Chapter 1 FL-net Overview 9 − 9 − − −
Chapter 2 Overview of 262IF-01
Module
9 9 9 9 9 9
Chapter 3 Mounting and Starting
the Module
− 9 9 9 9 9
Chapter 4 FL-net Transmission
Definition
− 9 9 − 9 9
Chapter 5 Details of FL-net 9 − 9 9 9 9
Chapter 6 Message Send and
Receive Functions
− − 9 − 9 −
Chapter 7 Troubleshooting − 9 9 9 9 9
ΠThis symbol is used to indicate important information that should be memorized or minor precautions,
such as precautions that will result in alarms if not heeded.
S-ON = /S-ON
P-CON = /P-CON