beautypg.com

Yaskawa JAPMC-MC2303-E User Manual

Page 45

background image

3

Mounting and Starting the Module

3.3 Setting the Communication Manager

3.3.2 Setting the Communication Manager

3-15

3.

Enter the IP address of computer for the IP Address (First), make sure the rest of the settings are as
shown below, and click the OK Button to close the dialog box.

4.

The Logical Port Setting Dialog Box will be displayed again. Click the OK Button to return to the
Communication Manager Window. Check that the Ethernet (LP) is assigned to Logical Port No. 3.

5.

Save the settings and restart the Communication Manager.

Refer to

„

Saving the Communication Port Settings and Restarting the Communication Manager on page 3-10

for the procedure.

See also other documents in the category Yaskawa Equipment: