Yaskawa JAPMC-MC2303-E - Manual (Page 39)

3
Mounting and Starting the Module
3.3 Setting the Communication Manager
3.3.2 Setting the Communication Manager
3-9
3.3.2 Setting the Communication Manager
This section describes the procedure to set the Communication Manager for connecting the MPE720 and MP2000
Series Machine Controller for each type of communication port.
( 1 ) Settings for Serial Communication Port (RS-232C Connection)
These settings are required to perform engineering communication via the serial (RS-232C) port of each Communica-
tion Module using the MPE720. Use the following procedure to make the settings.
1.
Double-click Logical PT number 1 in the Communication Manager Window.
The Logical Port Setting Dialog Box will appear.
2.
Select Serial under Port Kind and then click the Detail Button.
The Serial Port Setting Dialog Box will appear.
3.
Match the settings under Physical Port to the computer's serial communication port. Leave the other
items on the default settings. Once the settings have been completed and checked, click the OK But-
ton to close the dialog box.
Double-click