Yaskawa JAPMC-MC2303-E - Manual (Page 21)

2.1 Overview of 262IF-01 Module
2-2
2.1 Overview of 262IF-01 Module
The 262IF-01 has been designed as a communication module for connecting to FL-net via an Ethernet interface
(100BASE-TX or 10BASE-T). FL-net allows this module to be connected to equipment of other manufacturers.
The 262IF-01 supports FL-net (OPCN-2) Version 2.0.
„ Notes on 262IF-01
The 262IF-01 Module has been designed as a communication module dedicated for use in FL-net. Note the following points:
The 262IF-01 cannot be connected to a regular Ethernet from the 218IF-01 or 218IF-02.
Though the 262IF-01 Module uses a standard Ethernet cable, it does not allow connection for communications based on gen-
eral-purpose TCP/IP or UDP/IP because it serves only as an FL-net-dedicated module.
The MPE720 engineering tool cannot be connected to the 262IF-01 directly.
When connecting the MPE720, separately prepare a module with any of the RS232C, Ethernet, and CP-215 ports for connec-
tion.
No serial port (RS-232C) has been mounted.
1
MP2300 controller
MPE720 262IF-01
MP2200 controller
218IF-02 218IF-01
Ethernet
2
MPE720 262IF-01
Ethernet
3
262IF-01
There is no serial port
(RS-232C).