Yaskawa Sigma II Series DC Power Input SGMAJ - Manual (Page 97)

4.6 Dimensional Drawings
4-13
4
4.6 Dimensional Drawings
4.6.1 24 VDC: 10/50 W (A1C†/A5C†)
48 VDC: 50 W to 200 W (A5E† to 02E†)
External dimensions common to all SERVOPACKs for speed, torque, and position control are shown in the fol-
lowing diagrams.
Note: The terminal block connector is not attached to the SGDJ SERVOPACK. The terminal block connector must
be provided by customer.
4.6.2 24 VDC: 80 W (A8C†)
48 VDC: 300 W (03E†)
External dimensions common to all SERVOPACKs for speed, torque, and position control are shown in the fol-
lowing diagrams.
Note: The terminal block connector is not attached to the SGDJ SERVOPACK. The terminal block connector must
be provided by customer.
Mounting Hole Diagram
160 (6.30) 160 (6.30)
35
(1.38)
35
(1.38)
20 (0.79) 7
(0.28)
5 (0.20)
5
(0.20)
CN5
CN8
CN9
CN4
CN7
CN3
CN1
3-M4 tap
Mounting Pitch
150
±
0.5 (5.91
±
0.02)
YASKAWA ELECTRIC
MADE IN JAPAN
3-M4 tap
(Depth 10mm (0.39) max.)
82 (3.23) 20
(0.79)
140 (5.51)
9
(0.35)
(1
1)
(0.43)*
120 (4.72) (37)
(1.46)
Nameplate
* Reference length
Units: mm (in)
Approx. mass: 0.6 kg (1.32lb)
Mounting Hole Diagram
3-M4 tap
160 (6.30) 160 (6.30)
160 (6.30)
43
(1.69)
43
(1.69)
13 (0.51) 7
(0.28)
5 (0.20)
5
(0.20)
Mounting Pitch
150
±
0.5 (5.91
±
0.02)
120 (4.72) 37
(1.46)
Units: mm (in)
Approx. mass: 0.8 kg (1.76lb)
Nameplate
Nameplate
CN5
CN8
CN9
CN4
CN7
CN3
CN1